![]() It’s not ideal for installing a large number of T-posts.I’ve witnessed a guy cut himself pretty badly by getting his hand pinched between a sledgehammer and T-posts while hitting posts. For example, it can be used to drive a few medium-sized T-posts on soft ground.ĭrawbacks of using a sledgehammer for driving T-posts: Many people suggest using a sledgehammer to drive T-posts, but It’s not recommended except for certain conditions. Sledgehammers are used for demolition purposes due to their heavier weight. Method 2: Drive T-posts with a Sledgehammer: Tip: To make installation easier without any tool, adequately water the spot & let it soak. Repeat until the t-post is driven up to the desired depth.Lift the pipe up and pound it down forcefully.A 10 feet T-post must go at least 3 feet under the ground. As per rules: “ 1/3 to 1/2 of the post out of the ground should be driven into the ground“.įor example, a 6-foot T-post should be driven at least 1.5-2 feet. ![]() It’ll take a very long time, and there are a lot of chances it’ll slip and cause injury.ĭriving 1/3 of the T-post (2-3 feet) is recommended for greater strength in your fence. You can’t use a sledgehammer to drive T-posts.You must incorporate wood posts if you are installing heavy-duty, heavy-weight fences, such as agriculture land fences.The more part of T-posts you drive, the fence will be more stable.If the soil is moist, driving t-posts will be easier & vice versa. ![]() If you have a metal pipe, you can also convert it into a post-driver.In hard ground, you can dig pilot holes using a thin bit auger drill, masonry drill, or a jackhammer to make T-post installation easier. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |